R35iL rotary encoders

As a particularly low-profile and low-weight alternative to the R35i, RENCO also offers the R35iL rotary encoder. It can be used in the same types of applications but, thanks to its low height of just 8.6 mm, lends itself particularly to applications with critical installation parameters and limited space.

Even with its low footprint, the RENCO R35iL still offers state-of-the-art performance capabilities. These include a resolution of up to 5000 signals per revolution, commutation signals (U, V, and W), and an operating temperature range of –30 °C to +115 °C.

With its integrated mounting aid, the R35iL is also equipped for convenient, self-centering installation. The R35iL runs on a supply voltage of either 3.3 V or 5 V.

Ordering key

R35iL-5000/4-6mm-PP/PP-5V-1-R-...-M

5000/46mmPP5V1R...M
Number of signal periods / CommutationShaftOutput signalPower supplyReference markConnecting directionForm of housingMounting option, modular encoders

Selection table

Number of signal periods100, 200, 250, 256, 400, 500, 512, 625, 800, 1000, 1024, 1250, 2000, 2048, 2500, 4000, 4096, 5000
Commutation
0Without commutation
2 bis 32Number of commutation signal periods per revolution (number of motor pole pairs)
Shaft
Metric4 mm, 5 mm, 6 mm, 8 mm
Inch1/8+, 3/16, 3/16+, 1/4, 1/4+, 5/16, 3/8, 3/8+
Output signal
PPSquare-wave signals with push-pull driver output
Power supply
3,33,3 V ±5%
5 V+5 V ±10%
Reference mark
1Width: 90° ±45° elec. Gate: Ua1 High und Ua2 High
6Width: 90° ±45° elec. Gate: Ua1 Low und Ua2 Low
7Width: 270° ±45° elec. Gate: Ua1 High und Ua2 High
8Width: 270° ±45° elec. Gate: Ua1 Low und Ua2 Low
Connecting direction
RRadial
Form of housing
...Without housing
C, SC*Closed housing (upon request)
H, SH*With central hole (upon request)
Mounting option, modular encoders
MMetric
UUNC

* Housing with strain relief connection for the output cable